|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
I want to share what I feel is a good application of an injection channel, as introduced by Romy. But this is different and also useful and i can tell you it works and very well. Of course, I do not recommend to use this application in the same exact...
|
[quote user="Markus"]Re-reading, I realise you stated your preference for a sealed bass array only in relation to Dreyer's bass horn, not to bass horns in general.[/quote]Markus, it is not only about the Dreyer's bass horn. It is about lower bass...
|
[quote user="msaudio"]
Romy If you would thank about what you are building and what it does, you would grasp the concept of my thanking. You have a 7inch hole on your bafflle with your woofer on the back side of it in a sealed box. The only...
|
The kids are growing up and twins sleep fine and walk already.
So, the Bessnow’s household is calming down, a live-in nanny for sure helps…
With more time at my heads I am trying to finalize my playback in our new home.
I spent a few hours today t...
|
I've had a long-time desire to replace my Edgar 80hz midbass shells with a better performing solution. My Edgarhorns arrived in 2005, and I made incremental improvements over the years until now they have little in common with the original Edgarhorn...
|
[quote user="Romy the Cat"]Output transformer. Here is
what the thing become complicated. Of you drive ultra-low impedance with step
down transformer then your secondary turns will decrease. They primary will
have whatever they have for all case b...
|
[quote user="Markus"]There's no plasma tweeter on the Cessaro. The tweeter is the TAD ET-703. The HK owner has a gold-coloured horn for the tweeter, but there's no plasma driver. I'm pretty sure the horn on the Lansche plasma tweeter is a good bit la...
|
(Note: I've neither seen nor heard these speakers)
Cessaro ALPHA:
TAD TD-4001 2" driver on tractrix horn with 56cm bell (approximately 250Hz). TAD claims response from 600-20KHz. Given that the midbass is essentially a direct radiator (theref...
|
Jessie, there is another solution that you might consider, that might be viewed as compromise for one-side as might not be view is compromised from other side. If to allowed ourselves to close eyes to midbass timing-integration and if the geography o...
|
[quote user="Jorge"]Hello Anthony,I did experiment with metal tubes for bass in a sealed configuration as you are planning. The weight of them, even made out of thinner than you would like steel, is prohibitive. If you make them out of aluminum pipe...
|
It is right that when you do not have bass problem then why to do any absorption for it ...But how do you know you do not have any problem ?o0 To make it simple and easy just forget about the impedance : it happens this wayyou have distributed mass a...
|
Dear Romy and all,
I’ve been lurking here for a few months and - after a sceptical start! - I have found this site an Invaluable Help. Many many thanks to Romy and all involved. My system is now starting to sing and make nice noises for the first ti...
|
As a builder I can pre-warn you that this could be a fairly complex and very expensive proposition if done in cast concrete. For that matter excavation, per se, is expensive, and municipalities differ about what you can...
|
Well yesterday this miserable Catographer was cleaning out his garage when he made a instructive discovery in the beer refridgerator out there. I vaguely remember un plugging it in April during a suspect electrical project, but what I ...
|
As some of you know I’m playing last couple days with Red 10” Tannoys from 60s. My selection of 10” was not accidental -I would like to get as less as possible of that “Tannoy bass” but I did run very far the “Reds” turned out to have 27Hz open...
|
[quote user="Romy the Cat"]The biggest problem that usually people face when they listen the middbas horn is that people tend to make the middbas horns too short. In the short horn the driver shot right through the horn and the LF go not “get loaded”...
|
[quote user="kodomo"]Here is my response for the Supravox 285-2000 in 110cf tractrix. I designed a sealed chamber and with the qtc 0.707 it is tuned to 160hz. However I hope the modified version will be even better![/quote]I think that Group Delay an...
|
Thanks, Romy, for your generous reply.
I won't try to address everything about everything, but let me bore
you with a mini-history of what is going on with my playback so you
will understand where I'm coming from and where I'm trying to ...
|
[quote user="be"] Instead of defining the ULF range from the reproduced instruments, it is much smarter to do it based on the first resonance frequency of the listening room, because the frequency response of a closed room has a 12dB/oct rise in ...
|
[quote user="jessie.dazzle"]Upper Bass : Frequency range between 100 and 500Hz – Driver loaded into a 120Hz straight horn, driven by DSET dedicated channel. Mid Bass : Frequency range between 40 and 100Hz – Driver loaded into a 45Hz straight hor...
|
This weekend wife told me that I should not do nothing else
but to fix my playback and this was exactly what I wanted to do. Yesterday I took
good 14 hours to play with it, moving boxes, trying to find a good
configuration, making measurements, th...
|
I'm looking to internally wire to binding posts on exterior of box from woofers in a sealed cabinet. I was wondering what are some options for wiring that will not be a hinder. Would a heavy gauge copper 6nine's copper be sufficient? I'm using so...
|
Miab, since what I became an expert in cables? I am as much as anyone else – a subject of accidental discovering...
I do not use in Injection Channel any fancy cables. There is not a lot of need for it. The Injection Channel is mixed with M...
|
Honestly there is not enough info here to make a usefull recommendation. If the drivers are going to be used from the 95hz crossover point up then you might not even have to worry about it if the Fs is well below that. I would not do it anyway since ...
|
[quote user="unicon"]It is right that when you do not have bass problem then why to do any absorption for it ...But how do you know you do not have any problem ? [/quote] I was under impression that my criterion is my judgment if what I would like to...
|
[quote user="Paul S"] I have been surprised that you have not already pursued the Zarathustra for your multi-driver, sealed LF. From your early descriptions of both, this seemed like a natural pairing and the most likely way to go, to keep the ...
|
I recently completed some upper bass horns which I'm now enjoying very much. Sadly I lack the skills of someone like Jessie so my efforts are crude in comparison, but they are working well for me which is the main thing.I already had some old frontlo...
|
[quote
user="anthony"]Hi Romy,
So it is time to think about the bass output
transformer in my DSET. My bass channel will be 8 x 25W/8565-00 each side
set in a sealed box and will cover the frequency range below say 100Hz.
These drivers can be ...
|
Ronnie,
Arranging the driver in a line array is a fierily straight forward thing. Also be advised that the arrays will less likely work across a short wall, and you need to use a long wall. Generally it is imposable to advise anything as any rooms a...
|
It happen that I thought that my old Sony XBR Trinitron TV when sound and I was forced to by a new one. The old TV turner out to be fine and I was stupid to be left with the new one. It is a contemporary LED TV, they say the it is the best. I say...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
0 |
|
|
|
Total human visitors: |
42,921,828 |
|
|
|
|
|
|